800-343-4048

For Release:
Immediately
Contact:
Judy Silva, Marketing Communications Manager
Phone 978-556-2738
jasilva@parker.com

 

New Compressed Air Testing Device Allows Users to Test for the Presence of Microbial Contamination in Compressed Air Systems.

15-Oct-2014

Haverhill, MA – The Filtration and Separation Division of Parker Hannifin Corporation, the global leader in motion and control technologies, has introduced an innovative compressed air microbial detection device which allows users to quickly test for microbial contamination in compressed air that comes into contact with food and food contact surfaces. 

The warm, dark, moist environment inside a compressed air system provides the perfect conditions for microbes to flourish and grow. These bacteria flow along with the air stream and begin their journey through the compressed air system. Introducing this type of microbial contamination to food products is very risky and would be considered a lack of control by the facility. It is not always apparent where the compressed air is contacting the food. Working surfaces such as counters and conveyors are obvious and manageable contact points. However, air is invisible, and leaves no visible trace where it contacts the food, food contact surfaces, or the packaging. 

Currently, the only devices capable of sampling compressed air systems for microbes are expensive, cumbersome, require lengthy sample times and extensive training. 

The Parker Balston CAMTU detection device allows food safety personnel to quickly and easily test for contamination present in compressed air supplies that come in direct contact with food product or food packaging/processing equipment. The CAMTU is portable, weighing less than one pound, and is supplied with connection tubing, shut off valve, pressure regulator, and metering orifice.

To obtain a sample, simply plug the CAMTU into the compressed air system, expose the petri dish for 20 seconds and then incubate the dish for 24 - 48 hours. 

Testing is critical for understanding how to properly treat the compressed air. The CAMTU will assist with identifying Hazard Analysis and Critical Control Point (HACCP) risks. Without adequate treatment in place, an increased risk of food product contamination exists. 

For additional information, contact Parker Hannifin Corporation, Filtration and Separation Division, call toll-free at 1-800-343-4048 or 978-858-0505. Parker Hannifin Corporation, 242 Neck Road, Haverhill, MA 01835-0723.



© Parker Hannifin Corp 2015 - Privacy Policy | Site Map

Parker Hannifin Corporation
Gas Separation and Filtration Division
4087 Walden Ave.
Lancaster, NY 14086
1-800-343-4048 (US and Canada)
1-978-858-0505
Fax: 978-478-2501